Reverse osmosis (RO membrane) cleaning agent Product Description: This product can effectively remove the inorganic reverse osmosis membrane fouling, metal oxides and colloidal deposition, microbial contamination, organic dirt and silicate scale Features: Combining the latest Polyelectrolyte biodegradable formula effectively remove the dish polyamide membrane cellulose acetate membrane and synthesis of inorganic and organic membrane fouling; such as: calcium carbonate sulfuric acid strontium barium sulfate calcium-iron oxide silicon acid such as magnesium calcium silicate. Physico-chemical properties: acidic formula Appearance: light red transparent liquid PH value: 2 ~ 3 weight: 1.10 ± 0.05 Basic formula Appearance: White transparent liquid PH value: 9 ~ 11 weight: 1.18 ± 0.05 Use: 1. When the normal 10-15% decline in production volume, or pressure to increase 10-15%, the reverse osmosis membrane to deal with the washing. At the scene through the use of RO water or dilution water may be 10 - 20% of the weight ratio of liquid to clean match. 2. With RO water through the thick low-pressure washing water side 15 minutes to remove residual water and some thick sediment pollution. 3. The cleaning fluid into the pump to filter, re-entering the RO pressure vessels, began to export water from the RO concentrated drainage, exhaust emissions out of the water should be to avoid the dilution of cleaning fluid. 4. Cleaning cycle from 30 to 45 minutes, and then soaked for 2 hours cleaning fluid. If the pollution is serious, may be appropriate to extend the immersion time. 5. After the soaking, washing recycling 30 minutes, and then row out all the cleaning fluid. With RO water through the low pressure washing system, washing out the emission of water, until the conductivity of the water near the water until Product Package: plastic barrel, 25 kg 200 kg dish; According to customer requirements Note: This product is to stimulate the skin, to avoid the dish with the skin contact with eyes and clothing.